- Fully mobile compressor with Honda GC135 4hp power unit coupled to heavy-duty, twin piston, cast iron pump.
- Fitted heavy-duty rubber transport wheels and protected by 360° roll cage.
- Heavy-duty drive guard protects belt and flywheel that is designed to force air over the pump to aid cooling.
- Supplied with full CE certification, test certificates and operating/maintenance manual.
- Features twin gauges and air outlet regulator.
- Runs on unleaded fuel.
Authorised distributor for Sealey, Fast Mover, Duren Tools, Lazer, Kamasa and other leading tools manufacturers.
-
Sale!
-
RoadStart® Emergency Power Pack 24V 3800 Peak Amps Starting Current: 690A Peak Amps: 3800A Voltage: 24V Auxiliary Output: 12V Cable and Clamp Length: 1.4mtr Weight: 19.64kg Please note that whilst this item is new, it may have been used for shop display and therefore it may not be supplied in it original outer packaging. -
Sale!
Suitable for use with bodyshop repair kits and chassis straighteners.- Model Number: RE92/20
- Capacity: 6 Tonne
- Sealey standard warranty appropriate to the model.
-
Sale!
Technical Specification Model No: VS215 Input Range: 0-5Vdc- Fast diagnosis of a common electronic fault.
- Simple to use digital meter indicates throttle position sensor output voltage.
- Connect to battery terminals and sensor signal wire and digital display will show output voltage as a percentage.
- Supplied in foam
-
Sale!
Lightweight wrench with heavyweight power, half the weight of traditional style 1"Sq drive air impact wrenches. Model no: SA687 Please note that this is a new built shop display unit so will NOT come in its original packaging. It does however have the standard Sealey warranty appropriate to the model. -
Sale!
Model No. TA060- Accuracy: ±1.4dB
- Frequency Range: 31.5Hz-8KHz
- Range: 30-130dB
-
This starter kit combines:- The long bed hand flexible Fast Mover sanding block, ref: FMT2090
- 30 Mirka Gold Sanding Strips (10 of P40, P120 & P180, supplied as strips)
-
This starter kit combines:- The long bed hand rigid Fast Mover block, ref: FMT2095
- 30 Mirka Gold Sanding Strips (10 of P40, P120 & P180, supplied as strips)
-
Sale!
Sealey TB56 Conversion Lead 7-Pin N & S Type Plugs to 13-Pin Euro 12V- Converts 7-pin N-type and 7-pin S-type vehicle electrics to 13-pin Euro caravan and trailer electrics.
- Fitted with 200mm cable.
-
Magnetic gravity spraygun holder / stand. Simple to use and easy to relocate on steel surfaces. Model ref: FMT5100 -
Duren 521981 Under-body Coating Gun complete with extendable & flexible hose for applying wax to vehicle cavities.- Air inlet: 1/4"
- Air Pressure: 3-8Bar (45-1220 PSI)
- Max Pressure: 100 Bar (150 PSI)
-
A great 13 piece general spray gun cleaning and maintenance kit. Model Ref: FMT SGC13 -
Ideal for both primer & top coat. Choice of 2 Setups: 1.3mm or 1.8mm - please select from dropdown menu- Max Pressure: 90PSI/6.2BAR
- Operating Pressure: 3BAR/43PSI
- Air Consumption: 6.9-8.9CFM
- Air Inlet: 1/4”
- Cup Size: 600ml
-
Mirka Abranet Hand Dust Extraction Sanding Block (Grey) complete with 20mm x 4m Hose- Mirka Ref: 8391502011
- Mirka Hose Ref: 8391112011
- 70 x 198mm
- Grip 22 holes
- Includes adapter 20/28 mm
-
This Fast Mover Sanding Block kit includes:- 1 x 70mm x 125mm Hard (rigid) Sanding Block (FMT5529)
- 1 x 70mm x 125mm Soft Sanding Block (FMT5528)
- 1 x 150mm Diameter Soft Foam Hook & Loop Block (FMT5511)
- 1 x 150mm Soft Sanding Block (FMT5510)
-
Mini HVLP gravity spray gun ref: FMT3600- For SMART touch-up paint repairs and perfect for alloy wheel painting.
- Stainless steel inside components, so suitable for use with water and solvent based paints.
- Can be used with 3M disposable pot system.
-
LVLP gravity spray gun ref: FMT3006 Set up: 1.3 (Green), 1.4mm (Blue), 1.8mm (Gold) - please select from dropdown menu- Suitable for water and solvent based paints.
- Operates with a very low air consumption, just 4.2-6cfm depending on the setup specified.
- Ideal for those with smaller compressors.
-
- Hymair Model: NST-5040F
- Heavy duty twin hammer mechanism
- Full power in reverse and adjustable 3-position power in forward
- Ergonomic design with rubber protective grip
- Great for installing/tightening or removing/loosening thread fasteners and for other workshop applications
- Handle exhaust
- 500 LT-FB
-
- Hymair model ref: AT-239
- 1/2" Square Drive
- 7,000 rpm
- Durable twin hammer impact mechanism
- Adjustable power regulator
- Easy to service two-piece construction
- Super power and performance features to tackle the toughest jobs ease
- Ideal for installing/tightening or removing/loosening threaded fasteners and for other workshop applications
- Front exhaust
- 500 LT-FB
-
Professional Air Tools from Hymair- Model Ref: NST-2070F
- Ergonomic design with rubber protective grip
- Alloyed steed barrel and heat-treated piston
- Built-in power regulator and trigger control
- Coil spring retainer for fast and easy chisel changes
- Includes cutting chisel, straight chisel, edge tool and pinch
- For general cutting, chipping and scraping
- Handle exhaust
-
Professional Air Tools from Hymair- Model Ref: NST-4032F
- Ergonomic design with rubber protective grip and auxillary handle
- Quick change keyless chuck for fast and easy bit changes
- Heavy duty full caged gear system for increased tool life
- Forward/reverse control feature
- Durable and reliable for general drilling, honing, reaming and hole sawing in all types of materials including sheet metal, wood and composites
- Handle exhaust
